The cleaning method of stainless steel sintered filter element

The cleaning method of stainless steel sintered filter element

The stainless steel sintered filter element is a widely used type of filter. It is made of stainless steel wire superimposed and vacuum sintering. The sintered filter element has good corrosion resistance, strong permeability , high strength and filtering rating, and also the wire mesh is not easy to fall off.

In the process using of the stainless steel sintered filter element, we have the following ways to clean if it happens to block up:

1.Heating evaporation method: we can move them by heating if there are some fouling on the sintered filter element, but It should be noted it can not have the carbon ash and solid attachment in the internal residue of the sintered filter element in the heating process.

2.Ultrasonic cleaning: Use the ultrasonic in cleaning liquid, it can move the fouling of the sintered filter element. and also the sintered filter element is porous, so it has the performance of Ultrasonic absorption, which effect the cleaning.

3.with a clean brush cleaning : This is the most commonly used in cleaning of the stainless steel sintered filter element.In the process of using, we recommend to clean by soft brush cleaning brush, because if you clean by hard brush which it easily caused the damage of the sintered filter element, and also effect the performance of entirety. If you use the cleaning washing liquid, it will be better.



Tags