SINFT 6-layer laminate is a standard and widely used type of sintered wire mesh . A single layer of fine woven wire mesh is placed between two layers of coarser square woven meshes, which is then added to two layers of a strong Dutch woven wire mesh and sintered together to form a strong plate. The single layer of fine woven wire mesh acts as the filtration layer, and can be customized to meet a particular filtration rating, ranging from 1 micron to 200 microns.

5-Layer Sintered Wire Mesh
 
These layers generally consist of 316L stainless steel wire mesh , but special alloys such as Hastelloy®, Monel®, Inconel®, Alloy 20 etc. can be incorporated as well.

5-Layer Sintered Wire Mesh
 
Our standard size is a 2’x4′ or 4’x4′ sheet, but different size discs, tubes, larger sheets and cones can be fabricated.
 
This type of sintered wire mesh laminate has uses in many industries including pharmaceuticals, chemical processing, food and beverage, and transportation. Applications include gas sparging, fluidized beds, liquid and gas filtration, Nutsche filters, pharmaceutical processing, centrifuges, and a variety of others including some that have yet to be developed and put into use.
 
 

SINFT 6-Layer Sintered Wire Mesh Technical Information

Part number Nominal Filter Rating(u) Structure Air Permeability(L/miin/cm2) Bubble pressure(mm H2O)
SFT-S6-1 1 100+400x2800+100+12x64+64x12+12 1.81 360-600
SFT-S6-2 2 100+325x2300+100+12x64+64x12+12 2.35 300-590
SFT-S6-5 5 100+200x1400+100+12x64+64x12+12 2.42 260-550
SFT-S6-10 10 100+165x1400+100+12x64+64x12+12 3 220-500
SFT-S6-15 15 100+165x1200+100+12x64+64x12+12 3.41 200-480
SFT-S6-20 20 100+165x800+100+12x64+64x12+12 4.5 170-450
SFT-S6-25 25 100+165x600+100+12x64+64x12+12 6.12 150-410
SFT-S6-30 30 100+450+100+12x64+64x12+12 6.7 120-390
SFT-S6-40 40 100+325+100+12x64+64x12+12 6.86 100-350
SFT-S6-50 50 100+250+100+12x64+64x12+12 8.41 90-300
SFT-S6-75 75 100+200+100+12x64+64x12+12 8.7 80-250
SFT-S6-100 100 100+150+100+12x64+64x12+12 9.1 70-190

 
 
 
 
->
Call of WhatsApp WhatsApp